Contact Blocks For Schlegel Push Buttons

 

 

 

A-SERIES
AZ-SERIES
B-SERIES
C-SERIES
D-SERIES
E-SERIES
M-SERIES
====

A-SERIES

A-SERIES

Provided with hard silver contacts. The Faston terminals 2.8 x 0.8 mm can also be soldered.
The contact blocks allow quick assembly with the actuators by simple snap action.

TypeDescription                   
Contact Blocks (momentary)
AT1NC + 1NO
ATO1NC
ATI1NO
ATO111NO + 2NC (1 NO closes earlier)
Illuminated Contact Blocks
ATL1NC + 1NO
ATL22NC + 2NO
Contact Blocks (maintained action)
AF1NC + 1NO
AF22NC + 2NO
Illuminated Contact Blocks (maintained action)
AFL1NC + 1NO
AFL22NC + 2NO
Lampholder for T5.5K socket
AL5
AL5-220
with incorporated electronic device 24V
with incorporated electronic device 220V
L5*)with 2.8x0.8 mm Faston terminals for later assembly
of pilot light heads. (* specify 10 or 20 units per box)
ATZContact Block (momentary action)
Twin Contact Blocks with "Deadman's Control Switch" function
AZZ1 NC, 1 NO
AZ0111 NC, 1 NO (closes earlier) , 1 NO (closes later)
AZ002 NC, with positive opening for the new emergency-off pushbutton acc. to DIN EN 418, EN 60947-5-5
AZ1113 independant NO for actuators with 3 switching positions

Technical data:
acc. to VDE 0660 Ui ~ 250 V, Ith 6A
acc. to VDE 0630 analogous
EN61058 = IEC 1058 ~ 250 V 6(3) A 5E4

Suitable actuators:
– QUARTRON
– QUARTRON-L
– QUARTRON-JUWEL
– QUARTRON-L-JUWEL
– RX
– RX-JUWEL

* Contact blocks shown below are only a small sampling of what is available. Please open the attached PDF catalog for a complete list including detailed specifications as well as the bulbs available for the lighted units in this series.

Contact Block Compatibility

Schlegel-A-Series-Contact-Block-catalog

___________________________

AZ-SERIES

AZ-SERIES

Provided with hard silver contacts. The Faston terminals 2.8 x 0.8 mm can also be soldered.
The contact blocks allow quick assembly with the actuators by simple snap action.

TypeDescription                    Pins
Contact Blocks (momentary)
AZ0111NC + 1NO + 1NO early make8
AZ011_AU1NC + 1NO + 1NO early make (gold plated)8
AZ011_971NC + 1NO + 1NO early make8
AZOO2NC4
AZOO_AU2NC (gold plated)4
AZOW11NO + 1NC + 1 center contact8
AZ1111NO + 1NC + 1 center contact8
AZ111_AU1NO + 1NC + 1 center contact (gold)8
AZ22NC + 2NO8
AZ2N2NC + 2NO8
AZVN1NO earl make + 1 NC early break8
AZVN_AU1NO earl make + 1 NC early break (gold plated)8
AZOSOI1NC + 1 NO
Momentary for Emergency Stops with failure switch off
8
AZSOSO2NC
Momentary for Emergency Stops with failure switch off
8
XAP10Socket, 10 pin10
XASocket, finger-protected for 10 pin10
XAP8Socket, 8 pin8
XAP4Socket, 4 pin4

Technical data:
acc. to VDE 0660 Ui ~ 250 V, Ith 6A
acc. to VDE 0630 analogous
EN61058 = IEC 1058 ~ 250 V 6(3) A 5E4

Suitable actuators:
– QUARTRON
– QUARTRON-L
– QUARTRON-JUWEL
– QUARTRON-L-JUWEL
– RX
– RX-JUWEL

* Contact blocks shown below are only a small sampling of what is available. Please open the attached PDF catalog for a complete list including detailed specifications as well as the bulbs available for the lighted units in this series.

AZ-series-contact-blocks

Contact Block Compatibility

___________________________

B-SERIES

B-SERIES

Standard contact blocks
suitable for all actuators with two end positions but no middle position.
With hard silver contacts. Quick assembly possible with the actuators by simple snap action.

Twin contact blocks
as described above, but with two separate plungers,
suitable for all actuators especially those with three switching positions.

TypeDescription     
Contact Blocks (momentary)
BZO1NC
BZI1NO
BZOI1NC + 1NO
BTI / BZII2NO
BTO2NC
Illuminated Contact Blocks (momentary)
BZO1NC
BZLI1NO
BTLI / BZLII2NO
BTLO / BZLOO2NC
BZLOI1NC + 1NO
BT_4392NC + 2NO
Contact Blocks (maintained action)
BZLO1NC
BZOO2NC
BF1NC + 1NO
BFI2NO
BT_4392NC + 2NO
Illuminated Contact Blocks (maintained action)
BFL1NC + 1NO
BFU2NO
BFL_4392NC + 2NO

Technical data:
acc. to VDE 0660 Ui ~ 250 V, Ith 6A
acc. to VDE 0630 analogous
EN 61058 = IEC 1058 ~ 250 V 6 (4) A 5E4

suitable actuators:
– OKTRON
– OKTRON-R
– OKTRON-JUWEL

* Contact blocks shown below are only a small sampling of what is available. Please open the attached PDF catalog for a complete list including detailed specifications as well as the bulbs available for this lighted units in this series.

Contact Block Compatibility

Schlegel-B-Series-Contact-Block-catalog

___________________________

C-SERIES

C-SERIES

The electronic contact blocks have three or six connections and the function
of a single-circuit inverter with snap action. With Faston terminals 2.8 x 0.8 mm.
The contact blocks have a snap-in lock for quick assembly with the actuators.
Utmost reliability even at lowest voltages and currents.

TypeDescription                                  
Contact Block (momentary)
CT1NC + 1NO (SPDT)
CT22NC + 2NO (DTDT)
Illuminated Contact Block (momentary)
CTL1NC + 1NO (SPDT)
CTL22NC + 2NO (DTDT)
CLLampholder

Technical data – contact unit: 
rated voltage: 48 V AC/DC non-inductive
rated current: 0.1 A
min. current: 0.01 mA

Technical data:
lamp T5,5K
lamp voltage: 60 V
lamp output: 1.2 W

* Contact blocks shown below are only a small sampling of what is available. Please open the attached PDF catalog for a complete list including detailed specifications as well as the bulbs available for this lighted units in this series.

Contact Block Compatibility

Schlegel-Contract-Block-Series-C

___________________________

D-SERIES

D-SERIES

When using the module holder type DMR max. 3 modules can be used in the first plane.
In turn, 3 planes can be assembled maximally, whereas on the 2nd and 3rd plane only 2 modules each should be used. From the 2nd plane a special module holder DMA must be used at the end.

Connection Type
Safe-to-touch (acc. to VDE 0106 sect. 100 and VBG4) Cage-Clamp connections.

Technical data
Safe-to-touch connections acc. to VDE 0106 T100 and VBG4
VDE 0630 sect 1 / EN 61058-1
IEC 1058-1
Category D
400 VAC/10(5)A

Suitable actuators:
– QUARTEX-R
– QUARTEX-R-JUWEL
– RONDEX
– KOMBITAST-R
– DUX-Standard
– RVA

Contact Block Compatibility

Schlegel-D-Series-Contact-Block-catalog

___________________________

E-SERIES

E-SERIES

TypeDescription
ETRContact block, momentary, 1-NC/1-NO
ETR2Contact block, momentary, 2-NC/2NO
ETLRIlluminated, momentary, 1-NC/1-NO + BA9 socket
ETLR2Illuminated, momentary, 2-NC/2NO + BA9 socket
EL9RLampholder BA9s
L9RLampholder BA9s
ETContact block, momentary for base-plate mounting,
1NC/1NO with centering ring
EL9Lampholder BA9s for base-plate mounting,

Technical Data:

Safe-to-touch connections acc.
to VDE 0106 T100 and VBG4
VDE 0660 sect 200/EN60947-5-1
IEC 947-5-1
AC 15 A600; lth: 10A
250 VAC/10 (6)A; 400 VAC/6A

Suitable actuators:
– QUARTEX-R
– QUARTEX-R-JUWEL
– RONDEX
– KOMBITAST-R
– DUX-Standard
– RVA

* Contact blocks shown below are only a small sampling of what is available. Please open the attached PDF catalog for a complete list including detailed specifications as well as the bulbs available for this lighted units in this series.

Contact Block Compatibility

Schlegel-Contact-Block-Series-E

___________________________

M-SERIES

M-SERIES

TypeDescription
MHR_3Module holder for 3 elements
MHR_5Module holder for 5 elements
MTOModular Contact, momentary, 1-NC
MTONModular Contact, momentary, 1-NC, late break
MTIModular Contact, momentary, 1-NO
MTIVModular Contact, momentary, 1-NC, early break
MFLatch-type module. When used as a center element, provides a maintained unit with the adjacent momentary-type modules
MFLMF latch-type module with lamp socket
MLLamp module with socket only (no lamp)
MLWML lamp module with series resistor and diode.
MLEDLamp module with LED. available in 18-30VAC/DC or 230VAC.
Available with blue, green, red, white, yellow LED lamps
MFLEDLatch-type lamp module with LED. available in 18-30VAC/DC or 230VAC. Available with blue, green, red, white, yellow LED lamps

Technical Data:
VDE 0660 sect 200 / EN 60947-5-1
IEC 947-5-1
AC 15 A 600; Ith: 16A
440 Vac / 10(6)A; 250 Vac 16(10)A

Suitable actuators:
– QUARTEX-R
– QUARTEX-R-JUWEL
– RONDEX
– KOMBITAST-R
– DUX-Standard
– RVA

* Contact blocks shown below are only a small sampling of what is available. Please open the attached PDF catalog for a complete list including detailed specifications as well as the bulbs available for this lighted units in this series.

Contact Block Compatibility

Schlegel-M-Series-Contact-Block-catalog