Three Phase Current Transformers

General Details
Pictures
Specs
Installation
Approvals

General Details

Three Phase Current Transformers (CTs) are current transformers designed for use with ammeters, watt meters and cross current compensation or for relay driver application. These units are available in the 600 v class series, and offer CSA approval.

Three Phase Current Transformers can handle more power than a 1-phase transformer and can be used to supply both 1-phase and 3-phase loads. The power handling capacity of a single-phase transformer is less due to use of only one set of windings.

______________________________________________________________________________

A Current Transformer (CT) is a type of transformer that is used to reduce or multiply an alternating current (AC). It produces a current in its secondary which is proportional to the current in its primary.

Current Transformers, along with voltage or potential transformers, are instrument transformers. Instrument transformers scale the large values of current to small, standardized values that are easy to handle for measuring instruments and protective relays. The Instrument transformers isolate measurement or protection circuits from the high voltage of the primary system.

These units provide a secondary current that is accurately proportional to the current flowing in its primary, presenting a negligible load to the primary circuit.

These units are the current sensing units of the power system and are used at generating stations, electrical substations, and in industrial and commercial electric power distribution.

Advantages of Current Transformers are that the units can measure high current easily, high electrical isolation, simple construction, and easy maintenance and installation.

___________________________________________________________________________

Features:

3 Phase
10KV BIL Full Wave
600 V Class

Applications:

Standards:

IEEE C57.13

Approvals:

______________________________________________

SORTED BY WINDOW SIZE BELOW

______________________________________________

Three Phase Current Transformers

3P4 Window 1.56″, Ratios 50-5 to 1200-5, Phase Center 3.56″, Non-Relay Class

_________________________________________

Three Phase Current Transformers

3P40 Window 1.75″, Ratios 100-5 to 500-5, Phase Center 4.50″, Relay Class C10-C20

______________________________________________

3P41 Current Transformer

3P41 Window 2.00″, Ratios 100-5 to 600-5, Phase Center 4.50″, Relay Class C10-C20

______________________________________________

3P42 Current Transformer

3P42 Window 2.50″,Ratios 100-5 to 1600-5, Phase Center 4.50″, Relay Class C10-C20

______________________________________________

3P43 Current Transformer

3P43 Window 3.00″,Ratios 200-5 to 2000-5, Phase Center 2.31″, non-relay class

______________________________________________

3P60 Window 1.25″ to 2.50″,Ratios 50-5 to 1000-5, Phase Center 4.50″, non-relay class

______________________________________________

Pictures

: Three Phase CT

Specs

3P4 Window 1.56″, Phase Center 3.56″, Non-Relay Class

3P40 Window 1.75″, Phase Center 4.50″, Relay Class C10-C20

3P41 Window 2.00″, Phase Center 4.50″, Relay Class C10-C20

3P42 Window 2.50″, Phase Center 4.50″, Relay Class C10-C20

3P43 Window 3.00″, Phase Center 2.31″, Non-Relay class

3P60 Window 1.25″ to 2.50″,Ratios 50-5 to 1000-5, Phase Center 4.50″, non-relay class

Installation

CT Ratio Modification

CTs How to install

Approvals

Three Phase Current Transformers

SORTED BY WINDOW SIZE BELOW

3P4 Window 1.56″, Ratios 50-5 to 1200-5, Phase Center 3.56″, Non-Relay Class

3P40 Window 1.75″, Ratios 100-5 to 500-5, Phase Center 4.50″, Relay Class C10-C20

3P41 Window 2.00″, Ratios 100-5 to 600-5, Phase Center 4.50″, Relay Class C10-C20

3P42 Window 2.50″,Ratios 100-5 to 1600-5, Phase Center 4.50″, Relay Class C10-C20

3P43 Window 3.00″,Ratios 200-5 to 2000-5, Phase Center 2.31″, non-relay class

3P60 Window 1.25″ to 2.50″,Ratios 50-5 to 1000-5, Phase Center 4.50″, non-relay class

Search

REQUEST QUOTE